The salt spray corrosion test chamber needs to be repaired before it is re-activated in the long-term unused condition, to prevent the long-term unused use of the test box line aging, and the electrical components and components are too dusty to cause the reaction to be insensitive. Today, Xiaobian will tell you about the precautions for salt spray corrosion test box maintenance: Rayon Printed,Rayon Big Floral Print Fabric,Rayon Print Stock Fabric,Rayon Border Print Fabric SHAOXING TUNING INTERNATIONAL TRADING CORP. , https://www.tuningtex.com
1. Thoroughly clean the working chamber and water sealing tank with clean water, and clean the nozzle to prevent salt crystallizing and block the nozzle;
2. Before re-enabling the salt spray corrosion test chamber, perform necessary inspections on the electrical system;
3. Check if the pressure regulating valve is within the set range and whether there is water in the saturator and drain through the drain valve;
4. If the salt spray test chamber is not used for a long time, the water of the saturator should be discharged;
5. If the nozzle is found to be blocked by dirt, the nozzle can be removed with alcohol, xylene 1:1 hydrochloric acid for cleaning, or ultra-fine steel wire to clear the nozzle, but the surface of the nozzle cavity should not be damaged, so as not to affect the quality of the spray. .
In order to improve the working efficiency of the salt spray corrosion test chamber, the usual maintenance and cleaning work is indispensable, and it is natural to avoid some equipment failure problems from some small details.