The handling of industrial chiller faults must strictly follow the scientific procedures, and should not blindly act when the situation is unclear, the fault is unclear, and the mind is innumerable, and the industrial chiller is dismantled at will. The consequences of this will often magnify the failures that have occurred in industrial chillers, or cause new failures, and even cause serious damage to industrial chillers. T-Shirt Fabric,Stretch Shirt Fabric,Fashion Shirt Fabric,Check Design Fabric Shaoxing Cornfield Textile Trading Co,.Ltd , https://www.cornfieldtextile.com
If the industrial chiller in operation is malfunctioning, the unit should be shut down first, and then the site inspection should be carried out carefully to understand the working conditions of the industrial chiller in the event of the failure, and determine which part of the industrial chiller The failure occurred and how bad it was.
After determining the fault occurrence and taking emergency measures, the company's industrial chiller operator should contact the supplied industrial chiller factory in time to inform the fault location and fault condition in detail. After the factory-scheduled industrial chiller maintenance technician arrives at the site, it can automatically start the operation of the industrial chiller or auxiliary device that can operate in a short period of time without further deterioration of the fault, in order to correctly analyze the cause of the fault. Accurate basis for perceptual knowledge.
In addition, the cause of the fault can be analyzed by checking the operating log of the industrial chiller. In particular, it is necessary to pay attention to the different normal operating data and problems in the record table, as well as the running time and reliability of the replaced or repaired parts, and to understand the safety protection shutdown caused by any reason, etc. Close relationships are especially important.
If the company wants to ensure that the industrial chiller can operate normally, safely and stably for a long period of time, an industrial chiller can be configured as a backup if conditions permit, even if one of the industrial chillers is inevitable due to long-term operation. The failure occurs, and the standby industrial chiller can be started to work without affecting the company's demand for refrigeration.
Of course, the more important thing is that the company must carry out regular cleaning and maintenance work on industrial chillers. Because no matter whether it is any kind of machine equipment, the long-term coupling operation or friction of each component will inevitably cause a certain degree of wear on the unit, which will naturally lead to the failure.