[China Glass Net] The multi-functional shower room has a sophisticated appearance and a modern sense. Its diversification presents a variety of styles. The shower room has quickly conquered people and occupied the main space of the bathroom. So how much do you know about the installation of the multi-purpose shower room? Today Xiaobian will share with you the practical multi-function shower room installation steps to eliminate your security risks, the specific steps are as follows: Garment Lining,Garment Shell,Lining Knitted Garments,Garment Shell And Lining ZHEJIANG HUIDE NEW MATERIAL CO.,LTD , https://www.zjhuide-microfiber.com
1. Determine the installation position of the whole shower room, adjust the foot screw of the bottom basin, find the level of the bottom basin, and connect the water pipe; then carry out the water discharge test of the bottom basin to check whether there is water leakage. (If you wait for the installation and then release the water test, once the water leak is found, the repair is more complicated.) Fix the back plate and shower screen with stainless steel screws on the back of the bottom basin.
2. Assemble the fixing pieces on both sides and fix them with stainless steel screws.
3. Assemble the front side shower screen to fix the glass, and insert the sealing strip into the gap between the glass and the frame on both sides.
4. Hang the activity door, assemble the top cover, and seal the edge with special mildew glass glue. Connect to the power supply and try the computer section.
5. The 90-degree pure copper elbow is connected to the hot and cold water port connection and the water supply is connected to the wire to avoid direct water supply to the wire. Water supply trial, check for water leaks.
6. Insert the lower water pipe into the sewer pipe, seal the drain pipe with glass glue, and install it.